How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add an additional key. It requires dealer service using an electronic handheld computer called Tech-2. Then a new key and transponder have to be purchased and then programmed to the car.
Make sure to rotate your keys in order to prevent one from deteriorating faster than another. This will help keep your keys in top condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They are equipped with electronics that make it difficult to duplicate. This has made theft of cars significantly more difficult than 20 years ago. However, it has made replacing lost keys an incredibly expensive task.
Every owner of a Saab 9-3 should have at minimum two working keys. It's expensive to replace a lost or damaged key since it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers usually charge between $100-$200 to complete this.
There are options to avoid these high costs. Some parts providers will find the code on an extra key (usually the same one that opens the doors and turns on the ignition) and cut a brand new key blade out of metal for less than the dealer's cost. The key must, however, be the same as the original to work correctly in your vehicle.
You can also change the case yourself by following these steps. You'll need an flathead screwdriver and patience. With the screwdriver, slowly tear the plastic away and then separate the emergency key from the case. Once the case is open remove all electronics and put them in your new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. This YouTube DIY video Cyclone Cyd will show you how to replace the battery in the remote key fob in just four steps. This tutorial is suitable for any modern-day saab key fob however, the procedure may differ slightly.
This button is usually placed near the Saab logo on the back of the fob. This button is usually located on the back of your fob next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the tiny hole in this button. This should be enough to open the case so that you can change the battery.
Once the new CR1632 battery is in place You can then reassemble the remote key fob and program it to your car. The entire process should not take more than an hour at most. It is a very simple procedure that doesn't require any special tools.
The procedure is a little more complicated in the event that you lose your key, but it is possible. The dealer must read the car's VIN and then order a new key blade and a TWICE module with the exact unique code. After that, they will be required to cut the replacement key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob is equipped with batteries that are used to lock and unlock your car. They have a limited life span and will eventually die. This is a problem that occurs that affects all cars. The good thing is that you can replace the battery on most key fobs, and not have to replace the entire case. You can buy replacement fobs from Amazon that have all the electronics already in place, so you'll simply open the case and replace the batteries in the original case. It is important to keep in mind that you'll have to take out the emergency key first. you can do this by inserting the screwdriver of a small flathead into the slot found in the middle of the case. Use the screwdriver to move around the case until it will split open, making it easy to remove.
If you're ready to replace your keys, keep a spare in your possession. This will save you a lot of money. If you have an extra key, you can request the dealer to cut it and program it for your vehicle. This is much cheaper than purchasing a new key fob.
If g28carkeys.co.uk don't have a spare you can add an additional key to your car, but this requires a lot of research and effort. It will cost you a few hundred bucks to add an additional car key. The computer of the vehicle must also be programmed. This can be accomplished by a professional, but it's a costly option for most owners.
Replacement Ignition
The current SAAB 9-3 features an alarm system that is more sophisticated that is based on a key code. If you lose your only key, it may be expensive to add another one since the car must include a computer and be programmed to accept a new key. Even a dealer can charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.
Dealers will charge you top dollar to replace your car's computer (also called the CIM or SAAB twice) if you lose your sole working key. We can reprogram the EEPROM on your car's computer to be prepared for a new key. This will save you more than 50% off what you would pay at a dealer.
If you have owned a SAAB 9-3 for an extended period of time and you're aware of the ignition keys aren't very durable. They can become incredibly sticky and the buttons are known to be removed from them occasionally which is why you should think about replacing your ignition key if it isn't performing as it should. It's not as difficult as you think to replace the ignition key. With the right tools, it can be accomplished quickly.